<?xml version="1.0" encoding="UTF-8"?>        <rss version="2.0"
             xmlns:atom="http://www.w3.org/2005/Atom"
             xmlns:dc="http://purl.org/dc/elements/1.1/"
             xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
             xmlns:admin="http://webns.net/mvcb/"
             xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
             xmlns:content="http://purl.org/rss/1.0/modules/content/">
        <channel>
            <title>
									iCode Forum - Recent Posts				            </title>
            <link>https://www.icode.com/community/</link>
            <description>iCode Discussion Board</description>
            <language>en-US</language>
            <lastBuildDate>Fri, 20 Nov 2026 13:34:47 +0000</lastBuildDate>
            <generator>wpForo</generator>
            <ttl>60</ttl>
							                    <item>
                        <title>RE: Mapping Intellivision controller to Batocera/RetroArch</title>
                        <link>https://www.icode.com/community/help-and-troubleshooting/mapping-intellivision-controller-to-batocera-retroarch/#post-216</link>
                        <pubDate>Sun, 08 Nov 2026 22:21:30 +0000</pubDate>
                        <description><![CDATA[@charmlessman   You first pick what controller you want the device to emulate and directions and buttons are all sent to that controller.  So for example, you pick left analog on top and tha...]]></description>
                        <content:encoded><![CDATA[@charmlessman   <br />You first pick what controller you want the device to emulate and directions and buttons are all sent to that controller.  So for example, you pick left analog on top and that means your controllers directions will be sent as a left analog directions and then on your button you just pick which button acts like which button number, typically just pick something like 3,4,5,6,7,8,9,10,11,12,13,14  so they dont conflict with you fire buttons which you normally map to 0 and 1. save it.   Then in batocera go to controllers input mapping and when it asks for different buttons or functions such as right thumb click, press wichever button you want on the controller and it will act as that function in batocera.]]></content:encoded>
						                            <category domain="https://www.icode.com/community/"></category>                        <dc:creator>Ali Jani</dc:creator>
                        <guid isPermaLink="true">https://www.icode.com/community/help-and-troubleshooting/mapping-intellivision-controller-to-batocera-retroarch/#post-216</guid>
                    </item>
				                    <item>
                        <title>RE: Mapping Intellivision controller to Batocera/RetroArch</title>
                        <link>https://www.icode.com/community/help-and-troubleshooting/mapping-intellivision-controller-to-batocera-retroarch/#post-215</link>
                        <pubDate>Sun, 08 Nov 2026 20:59:39 +0000</pubDate>
                        <description><![CDATA[@ali 
Thanks, but that just maps it so the keypad is mapped to the same input as the left thumbstick.  I need it mapped to the right thumbstick, and that doesn&#039;t seem to be an option in the...]]></description>
                        <content:encoded><![CDATA[<p>@ali </p>
<p>Thanks, but that just maps it so the keypad is mapped to the same input as the left thumbstick.  I need it mapped to the right thumbstick, and that doesn't seem to be an option in the Hub.</p>
<p>And further, that doesn't map the diagonals at all.  There doesn't seem to be a way to map all the number keys.</p>]]></content:encoded>
						                            <category domain="https://www.icode.com/community/"></category>                        <dc:creator>Charmlessman</dc:creator>
                        <guid isPermaLink="true">https://www.icode.com/community/help-and-troubleshooting/mapping-intellivision-controller-to-batocera-retroarch/#post-215</guid>
                    </item>
				                    <item>
                        <title>RE: Mapping Intellivision controller to Batocera/RetroArch</title>
                        <link>https://www.icode.com/community/help-and-troubleshooting/mapping-intellivision-controller-to-batocera-retroarch/#post-214</link>
                        <pubDate>Sun, 08 Nov 2026 13:38:55 +0000</pubDate>
                        <description><![CDATA[Hi.
You can change the controller keypad mapping on hub.icode.com so 2,4,5,6 don&#039;t map to the default up, left, down, right.Connect to hub.icode.com and change these and save!
&nbsp;keypad...]]></description>
                        <content:encoded><![CDATA[<p>Hi.</p>
<p>You can change the controller keypad mapping on hub.icode.com so 2,4,5,6 don't map to the default up, left, down, right.<br /><br />Connect to hub.icode.com and change these and save!</p>
<div id="wpfa-9594" class="wpforo-attached-file"><a class="wpforo-default-attachment" href="//www.icode.com/wp-content/uploads/wpforo/default_attachments/1794145135-keypad.png" target="_blank" title="keypad.png"><i class="fas fa-paperclip"></i>&nbsp;keypad.png</a></div>]]></content:encoded>
						                            <category domain="https://www.icode.com/community/"></category>                        <dc:creator>Ali Jani</dc:creator>
                        <guid isPermaLink="true">https://www.icode.com/community/help-and-troubleshooting/mapping-intellivision-controller-to-batocera-retroarch/#post-214</guid>
                    </item>
				                    <item>
                        <title>Mapping Intellivision controller to Batocera/RetroArch</title>
                        <link>https://www.icode.com/community/help-and-troubleshooting/mapping-intellivision-controller-to-batocera-retroarch/#post-213</link>
                        <pubDate>Sun, 08 Nov 2026 09:15:42 +0000</pubDate>
                        <description><![CDATA[I recently got the iCode Duo Ultimate SE H1-INT.  I was able to get it connected and functioning.
But now I&#039;m having a hell of a time getting the controls mapped to my Batocera machine runn...]]></description>
                        <content:encoded><![CDATA[<p>I recently got the<span> iCode Duo Ultimate SE H1-INT.  I was able to get it connected and functioning.</span></p>
<p>But now I'm having a hell of a time getting the controls mapped to my Batocera machine running RetroArch for Intellivision.</p>
<p>It seems that the keypad is mapped to the right thumbstick, and there seems to be no meaningful way to map it properly in Batocera.  When I try, it only asks for X axis and Y axis.  But since the keypad is a collection of individual keys, that's not really helpful.</p>
<p>Is there a way I can map the right thumbstick controls within the iCodeHub?  Or is there a way in Batocera to map individual buttons to the 8 directions,  Maybe the 5 to a thumbstick press or something?</p>
<p>&nbsp;</p>
<p>Thanks!</p>]]></content:encoded>
						                            <category domain="https://www.icode.com/community/"></category>                        <dc:creator>Charmlessman</dc:creator>
                        <guid isPermaLink="true">https://www.icode.com/community/help-and-troubleshooting/mapping-intellivision-controller-to-batocera-retroarch/#post-213</guid>
                    </item>
				                    <item>
                        <title>RE: iCode - paddle configuration on Atari 7800 - Fire1 or paddle button - missing in action</title>
                        <link>https://www.icode.com/community/help-and-troubleshooting/icode-paddle-configuration-on-atari-7800-fire1-or-paddle-button-missing-in-action/#post-212</link>
                        <pubDate>Fri, 06 Nov 2026 23:25:13 +0000</pubDate>
                        <description><![CDATA[Hello to everybody.
I solved the problem.
It was the configuration on the iCode Duo. Both paddle buttons were configured as &quot;Button 0&quot; (Paddle A Button &amp; Paddle B Button).
I changed, ...]]></description>
                        <content:encoded><![CDATA[<p>Hello to everybody.</p>
<p>I solved the problem.</p>
<p>It was the configuration on the iCode Duo. Both paddle buttons were configured as "Button 0" (Paddle A Button &amp; Paddle B Button).</p>
<p>I changed, assigning to Paddle B Button, Button 1.</p>
<p>I saved the configuration and it worked immediately.</p>
<p>&nbsp;</p>
<p>I have still to understand why the second time I got a modified configuration with the same Button 0.</p>
<p>@ali jani: yes, I had made the right configuration on Atari 7800.</p>
<p>I discovered the mistake, trying the check utility for pad on MiSTer.</p>
<p>I hope it works for you @matanik1</p>
<p>&nbsp;</p>
<p>The paddles work also with hte Original Pong.</p>
<p>&nbsp;</p>
<p>Enjoy your weekend!</p>]]></content:encoded>
						                            <category domain="https://www.icode.com/community/"></category>                        <dc:creator>boanergos</dc:creator>
                        <guid isPermaLink="true">https://www.icode.com/community/help-and-troubleshooting/icode-paddle-configuration-on-atari-7800-fire1-or-paddle-button-missing-in-action/#post-212</guid>
                    </item>
				                    <item>
                        <title>Which iCode Spinner or Trackball do I have? H1, H2, H3 ?</title>
                        <link>https://www.icode.com/community/help-and-troubleshooting/which-icode-spinner-or-trackball-do-i-have-h1-h2-h3/#post-211</link>
                        <pubDate>Fri, 06 Nov 2026 22:13:02 +0000</pubDate>
                        <description><![CDATA[Some of you have been asking how to tell which hardware version you have, so here’s a quick guide. It matters because each version needs its own firmware.
The easy way: ask the device. Tap ...]]></description>
                        <content:encoded><![CDATA[<p dir="ltr">Some of you have been asking how to tell which hardware version you have, so here’s a quick guide. It matters because each version needs its own firmware.</p>
<p dir="ltr"><strong>The easy way: ask the device.</strong> Tap <strong>Black</strong> to open the Settings Menu and choose <strong>System Info</strong>. It shows your model and firmware version. You may also see the model and version briefly on the screen when it starts up.</p>
<p dir="ltr">If you can’t get to either, here’s how to tell by looking at your device.</p>
<p dir="ltr"><strong>Spinner</strong></p>
<ul dir="ltr">
<li>Monochrome screen, no power LED → <strong>H1</strong></li>
<li>Monochrome screen with a power LED → <strong>H2</strong></li>
<li>Color screen → <strong>H3</strong></li>
</ul>
<p dir="ltr"><strong>Trackball</strong></p>
<ul dir="ltr">
<li>Monochrome screen → <strong>H1</strong></li>
<li>Color screen → <strong>H2 or H3</strong>. These two look identical from the outside.</li>
</ul>
<p dir="ltr">If you have a color Trackball and can’t get to System Info, install the <strong>H3</strong> firmware and try every button:</p>
<ul dir="ltr">
<li>If everything works, you have an <strong>H3</strong>.</li>
<li>If the big left (blue) arcade button doesn’t respond, or the arcade button lights don’t follow your presses, while everything else works, you have an <strong>H2</strong>. Install the <strong>H2</strong> firmware and you’re all set.</li>
</ul>
<p dir="ltr">Don’t worry about trying the wrong one: it won’t harm anything, and installing the right firmware fixes it.</p>
<p dir="ltr">And if you got one of the new Bluetooth Wireless model that can run on battery, it’s an <strong>H3-W</strong>. Use the H3-W firmware.</p>
<p dir="ltr">Any questions, just ask below!</p>]]></content:encoded>
						                            <category domain="https://www.icode.com/community/"></category>                        <dc:creator>Ali Jani</dc:creator>
                        <guid isPermaLink="true">https://www.icode.com/community/help-and-troubleshooting/which-icode-spinner-or-trackball-do-i-have-h1-h2-h3/#post-211</guid>
                    </item>
				                    <item>
                        <title>RE: iCode - paddle configuration on Atari 7800 - Fire1 or paddle button - missing in action</title>
                        <link>https://www.icode.com/community/help-and-troubleshooting/icode-paddle-configuration-on-atari-7800-fire1-or-paddle-button-missing-in-action/#post-210</link>
                        <pubDate>Fri, 06 Nov 2026 22:08:53 +0000</pubDate>
                        <description><![CDATA[@boanergos you make have missed the last part of step 2.
Load the Atari 7800 core, open the OSD (F12), and go to the Peripherals menu:

Port1 Input → Paddle
Port2 Input → Paddle
Allow M...]]></description>
                        <content:encoded><![CDATA[@boanergos <br /><br />you make have missed the last part of step 2.<br /><br />
<p>Load the Atari 7800 core, open the OSD (<strong>F12</strong>), and go to the <strong>Peripherals</strong> menu:</p>
<ol>
<li><strong>Port1 Input → Paddle</strong></li>
<li><strong>Port2 Input → Paddle</strong></li>
<li><strong>Allow Multi Paddles → Yes</strong> (this lets each gamepad supply two paddles — one on X, one on Y)</li>
</ol>
Did you change allow Multi Paddles to Yes?<br /><br />i tried it and it works for me.]]></content:encoded>
						                            <category domain="https://www.icode.com/community/"></category>                        <dc:creator>Ali Jani</dc:creator>
                        <guid isPermaLink="true">https://www.icode.com/community/help-and-troubleshooting/icode-paddle-configuration-on-atari-7800-fire1-or-paddle-button-missing-in-action/#post-210</guid>
                    </item>
				                    <item>
                        <title>Meet the iCode Quad Ultimate: four Atari controller ports, one USB plug</title>
                        <link>https://www.icode.com/community/help-and-troubleshooting/meet-the-icode-quad-ultimate-four-atari-controller-ports-one-usb-plug/#post-209</link>
                        <pubDate>Sat, 31 Oct 2026 19:45:20 +0000</pubDate>
                        <description><![CDATA[Bring your original Atari joysticks, paddles, driving controllers, trackballs and keypads to your PC, Mac, MiSTer FPGA, Steam Deck, Nintendo Switch, RetroPie, Batocera, and other systems. Th...]]></description>
                        <content:encoded><![CDATA[<p>Bring your original Atari joysticks, paddles, driving controllers, trackballs and keypads to your PC, Mac, MiSTer FPGA, Steam Deck, Nintendo Switch, RetroPie, Batocera, and other systems. There are no drivers to install: each port shows up as its own USB gamepad, so four players are four separate controllers.<br /><br />&#x2705; 4 built-in ports to connect any Atari controller for up to 4 players<br /><br />&#x1f3ae; It's a game machine too! Models with a screen let you play your Atari 400/800/XL/XE and 5200 games and select arcade games directly on the device!<br />&#x1f4be; Atari Games: a built-in Atari 400/800/XL/XE computer and Atari 5200, with four-player joysticks and paddles. Play Castle Crisis (Warlords style), Kaboom! and Super Breakout with your real Atari paddles. Play 4-player M.U.L.E. with joysticks.<br />&#x1f47e; Plus Arcade Games: 13 popular MAME arcade classics on the built-in color screen, including Pac-Man, Ms. Pac-Man, Galaga, Donkey Kong, Frogger, Dig Dug, Xevious and Space Invaders, with saved high scores.<br />&#x1f9f1; Bring your own game files; none are included, but they're easy to download and copy to the iCode device, as it acts like a USB drive.<br />&#x1f539; 3 built-in mini-games don't need any ROMs: Iron Dome (Missile Command style, great with your Atari trackball), Brick Bash (Arkanoid genre) and Jaw Cruncher (Pac-Man style).<br /><br />Three models:<br />&#x1f539; Quad Ultimate CX: color screen and speaker, arcade and Atari games<br />&#x1f539; Quad Ultimate CX-W: everything in the CX plus Bluetooth for 4 wireless players and a rechargeable battery<br />&#x1f539; Quad Ultimate SE: no screen, and it talks: voice prompts tell you each port, controller and mode<br /><br />&#x2699;&#xfe0f; Set it up, update the firmware and back up 100 presets for free at hub.icode.com. It works in Chrome or Edge with nothing to install.<br /><br />Full story: https://www.icode.com/icode-quad-ultimate-four-player-atari-usb-adapter/<br />Product page: https://www.icode.com/product/icode-quad-usb-ultimate-adapter-for-atari-joysticks-paddles-driving-trackball-keypad-controllers/<br />Setup guides: https://www.icode.com/help/quad/<br /><br />Questions, setup help or ideas for the Quad? Reply in this thread.</p>
<div id="wpfa-9507" class="wpforo-attached-file"><a class="wpforo-default-attachment" href="//www.icode.com/wp-content/uploads/wpforo/default_attachments/1793475920-quad_mule.png" target="_blank" title="quad_mule.png"><i class="fas fa-paperclip"></i>&nbsp;quad_mule.png</a></div>]]></content:encoded>
						                            <category domain="https://www.icode.com/community/"></category>                        <dc:creator>Ali Jani</dc:creator>
                        <guid isPermaLink="true">https://www.icode.com/community/help-and-troubleshooting/meet-the-icode-quad-ultimate-four-atari-controller-ports-one-usb-plug/#post-209</guid>
                    </item>
				                    <item>
                        <title>RE: Question about Sensitivity on my Spinner H3 Ultimate</title>
                        <link>https://www.icode.com/community/help-and-troubleshooting/question-about-sensitivity-on-my-spinner-h3-ultimate/#post-208</link>
                        <pubDate>Thu, 29 Oct 2026 19:18:16 +0000</pubDate>
                        <description><![CDATA[Thanks a lot! That helps me. So for my setup &quot;High&quot; is the choice.]]></description>
                        <content:encoded><![CDATA[<p>Thanks a lot! That helps me. So for my setup "High" is the choice.</p>]]></content:encoded>
						                            <category domain="https://www.icode.com/community/"></category>                        <dc:creator>Robert Polzer</dc:creator>
                        <guid isPermaLink="true">https://www.icode.com/community/help-and-troubleshooting/question-about-sensitivity-on-my-spinner-h3-ultimate/#post-208</guid>
                    </item>
				                    <item>
                        <title>RE: Question about Sensitivity on my Spinner H3 Ultimate</title>
                        <link>https://www.icode.com/community/help-and-troubleshooting/question-about-sensitivity-on-my-spinner-h3-ultimate/#post-207</link>
                        <pubDate>Thu, 29 Oct 2026 19:05:11 +0000</pubDate>
                        <description><![CDATA[Generally you want to leave the sensitivity on Very High in most cases as it moves the mouse 1 delta unit for every encoder tick so its a 1:1 ratio.  on High 2 ticks of encoder moves 1 mouse...]]></description>
                        <content:encoded><![CDATA[<p>Generally you want to leave the sensitivity on Very High in most cases as it moves the mouse 1 delta unit for every encoder tick so its a 1:1 ratio.  on High 2 ticks of encoder moves 1 mouse unit.<br /><br /></p>
<table>
<thead>
<tr>
<th>Setting</th>
<th>Encoder ticks per 1 mouse count</th>
<th>Mouse counts per tick</th>
</tr>
</thead>
<tbody>
<tr>
<td>Very High</td>
<td>1</td>
<td>1</td>
</tr>
<tr>
<td>High</td>
<td>2</td>
<td>1/2</td>
</tr>
<tr>
<td>Medium</td>
<td>4</td>
<td>1/4</td>
</tr>
<tr>
<td>Low</td>
<td>8</td>
<td>1/8</td>
</tr>
<tr>
<td>Very Low</td>
<td>16</td>
<td>1/16</td>
</tr>
</tbody>
</table>
<p><br />Table below shows how much does the mouse move per rotation assuming you have acceleration off:<br /><br /></p>
<table>
<thead>
<tr>
<th>Setting</th>
<th>Mouse counts per revolution</th>
</tr>
</thead>
<tbody>
<tr>
<td>Very High</td>
<td>2400</td>
</tr>
<tr>
<td>High</td>
<td>1200</td>
</tr>
<tr>
<td>Medium</td>
<td>600</td>
</tr>
<tr>
<td>Low</td>
<td>300</td>
</tr>
<tr>
<td>Very Low</td>
<td>150</td>
</tr>
</tbody>
</table>]]></content:encoded>
						                            <category domain="https://www.icode.com/community/"></category>                        <dc:creator>Ali Jani</dc:creator>
                        <guid isPermaLink="true">https://www.icode.com/community/help-and-troubleshooting/question-about-sensitivity-on-my-spinner-h3-ultimate/#post-207</guid>
                    </item>
							        </channel>
        </rss>
		