MiSTer FPGA Kit: Terasic DE10 NANO + Case + 128MB + USB HUB + Micro SD preloded

Sale!

$595.00

The MiSTer DE10-Nano Kit comes with everything you need for immediate plug and play action!

You get the the beautiful metal case, with the Terasic DE10-Nano FPGA  board, HDMI and Ethernet, 64GB SD card preloaded with OS and demo games ready to play, upgraded 128MB SDRAM to run larger cores, the IO board with VGA Connector, 3.5mm Audio Jack, Secondary SD,  TOSLink, 3 Buttons & Status LEDs on top, the 6 port USB Hub board and its expansion connector, plus the 5V 2A power supply (US plug), CPU heat sink, Cooling Fan, and all the cables needed!

The DE10-Nano board included presents a robust hardware design platform built around the Intel System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. Users can now leverage the power of tremendous re-configurability paired with a high-performance, low-power processor system. Altera’s SoC integrates an ARM-based hard processor system (HPS) consisting of processor, peripherals and memory interfaces tied seamlessly with the FPGA fabric using a high-bandwidth interconnect backbone. The DE10-Nano development board is equipped with high-speed DDR3 memory, analog to digital capabilities, Ethernet networking, and much more that promise many exciting applications.

Only 2 left in stock

SKU: MISTERDE10KIT Categories: , , Tags: , ,

Description

MiSTer FPGA Kit

Kits is fully assembled and tested in the following configuration.

  • Terasic DE10-Nano FPGA board with HDMI and Ethernet
  • 64GB SD card preloaded with OS and demo games ready to play
  • 128MB SDRAM extra slim memory board allowing to run larger cores
  • IO board that adds VGA Connector, 3.5mm Audio Jack, Secondary SD, and TOSLink, 3 Buttons, 3 Status LEDs
  • USB Hub board that provides 6 additional USB ports, with expansion connector
  • RTC V1.3 Real Time Clock Board (not installed but included)
  • 5V 2A power supply (US plug) – You may need adapter depending on your country
  • Heat Sink for the CPU
  • RBG Cooling Fan
  • All needed cables
  • Metal case enclosure
  • Fully Assembled

DE10-Nano FPGA Board Included

The DE10-Nano board has many features that allow users to implement a wide range of designed circuits, from simple circuits to various multimedia projects. The following hardware is provided on the DE10–Nano board:

  • Intel Cyclone® V SE 5CSEBA6U23I7  device (110K LEs)
  • Serial configuration device  – EPCS64 (revision B2 or later)
  • USB-Blaster II onboard for programming; JTAG Mode
  • HDMI TX, compatible with DVI 1.0 and HDCP v1.4
  • 2 push-buttons
  • 4 slide switches
  • 8 green user LEDs
  • Three 50MHz clock sources from the clock generator
  • Two 40-pin expansion headers
  • One Arduino expansion header (Uno R3 compatibility), can be connected with Arduino shields
  • One 10-pin Analog input expansion header (shared with Arduino Analog input)
  • A/D converter, 4-pin SPI interface with FPGA

HPS (Hard Processor System)

  • 800MHz Dual-core ARM Cortex-A9 processor
  • 1GB DDR3 SDRAM (32-bit data bus)
  • 1 Gigabit Ethernet PHY with RJ45 connector
  • USB OTG Port, USB Micro-AB connector
  • Micro SD card socket
  • Accelerometer (I2C interface + interrupt)
  • UART to USB, USB Mini-B connector
  • Warm reset button and cold reset button
  • One user button and one user LED
  • LTC 2×7 expansion header

MiSTer FPGA Kit: Terasic DE10 NANO + Case + 128MB + USB HUB + Micro SD preloded

Additional information

Weight 48 oz
Dimensions 8 × 7 × 5 in
GTIN

DE10-NANO-MISTER

Brand

Terasic

You may also like…

Scroll to top
Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.