Description
ODROID-H3 and H3+ have the same form factor and similar power efficiency as their predecessor, the ODROID-H2+. But, H3 and H3+ are more powerful and offer higher performance. With great compatibility, a brand new x86 64-bit single board computer with large memory capacity and advanced IO ports.
-
Model H3+
-
Intel® Quad-Core Processor Jasper Lake N6005 has a base clock of 2GHz
-
Boost clock of 3.3GHz with 1.5MB L2 and 4MB L3 cache by a 10 nm process.
- Intel UHD Graphics 32 EUs Turbo 900MHz
-
-
Model H3
-
Intel® Quad-Core Processor Jasper Lake N5105 has a base clock of 2GHz
-
Boost clock of 2.9GHz with 1.5 MB L2 and 4 MB L3 cache by a 10 nm process.
-
Intel UHD Graphics 24 EUs Turbo 800MHz(H3+:900MHz)
-
-
Up to 64GB Dual-channel Memory DDR4 PC4-23400 (2933MT/s)
-
Two SO-DIMM slots, up to 32GB per slot
-
PCIe 3.0 x 4 lanes for one M.2 NVMe storage
-
2 x 2.5Gbit Ethernet ports
-
2 x SATA 3.0 ports
-
SSE4.2 accelerator (SMM, FPU, NX, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AES)
-
HDMI 2.0 and DP 1.2 multiple video outputs
- A configurable Unlimited Performance mode allowing the CPU to run in sustained turbo boost mode.
- RTC / BIOS backup battery is included
Specifications
| Processor | 4MB L2 Cache
Intel UHD Graphics (24/32 EU up to 900MHz) |
| Memory | 2 x DDR4 1.2V SO-DIMM slotsDual Channel, up to 2933 MT/s (DDR4-PC23400)
Max memory capacity 64GB DDR3/DDR5 are not supported |
| Storage | 1 x eMMC connector (bootable and selectable on BIOS)Various eMMC modules can be purchased at Hardkernel store
2 x SATA3 6Gbps 1 x M.2 slot (PCIe 3.0 x 4, supports NGFF-2280 cards) M.2 SATA SSD is not supported |
| Networking | 2 x GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps)Realtek RTL8125B
Supports Wake-On-Lan LED indicators (Green: Link, Amber: Traffic) |
| Video | 1 x DisplayPort 1.2 (up to 4K@60Hz)1 x HDMI 2.0 (up to 4K@60Hz)
Dual simultaneous display support |
| Audio | 1 x Audio out (3.5mm jack)1 x Audio in (3.5mm jack)
1 x SPDIF out (ALC1200, HDA codec) * HDMI & DP have audio output too. |
| External I/O | 2 x USB 3.0 Host ports2 x USB 2.0 Host ports
1 x Peripheral Expansion Header (24-pin, 2.54mm pitch) – 1 x DC 5V, 1 x DC 3.3V, 5 x GND – 1 x UART (TXD/RXD/RTS/CTS) – 2 x I2C (SCL/SDA) – 1 x External Power Button – HDMI CEC, 5VA+ – 3 x USB 2.0 – All 3.3V I/O signal level |
| Other features | Passive HeatsinkBIOS Backup Battery
– Maintains system time and BIOS settings Power Button Reset Button System LEDS Indicators: – Red (PWR) – Solid light when DC power is supplied – Blue (left, SLEEP) – turns off only when the system enters into suspend mode – Blue (right, PMIC) – turns on only when the major power rails are working – Amber (SATA) – Flashes when SATA data transfers – Green (NVMe) – Flashes when NVMe data transfers Active Cooling Fan Connector (12V 4-pin, PWM input + TACHO output) – Active Cooling Fan is optional – Connector (4-pin, 2.54mm pitch) |
| Power | DC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mmDC 14V ~ 20V (up to 60W)
– DC 15V/4A power adapter is recommended if you don’t use two 3.5“ HDDs – DC 19V/7A power adapter is recommended if you two 3.5” HDDs together Power consumption: – IDLE : ≃1..9W – CPU Stress : ≃15W – CPU+GPU Stress : ≃18W – Power-off : ≃0.25W – Suspend : ≃0.6W |
| Form Factor | 110mm x 110mm x 47mm |
