Firmware, user manuals and release notes for the iCode Duo Ultimate and the Duo Ultimate SE editions.
Update with iCodeHub in Chrome or Edge — it finds the right firmware for your device and installs it. Need help? See iCode Device Help.
Duo Ultimate H1
Latest firmware: version 2.30 · released November 3, 2026
Update with iCodeHub Download firmware (.uf2) User manual (PDF)
The easiest way to update is iCodeHub in Chrome or Edge — it picks the right firmware for your device and shows these release notes as it updates. If you install the .uf2 file yourself, make sure it is the file for Duo Ultimate H1: firmware for another model can stop your device from working.
Release notes
Duo Ultimate H1 2.30 — November 3, 2026
iCode Duo Ultimate USB – Version 2.3 H1
Arcade and Atari games on the built-in screen, a start-up menu, Auto controller detection, and Atari Gamestation Pro support
Arcade Games (NEW)
- 13 classic arcade games on the Duo’s own screen. Pac-Man, Ms. Pac-Man, Galaga, Frogger, Donkey Kong, Donkey Kong Jr., Dig Dug, Space Invaders, Pooyan, Time Pilot, Xevious, Super Cobra and Scramble — play with the 5-way hat or a joystick on Port 1. Landscape or portrait (turn the Duo on its side), and a tap of Menu steps through the picture widths.
- Bring your own ROMs. Pick ROM Drive (USB) in the game list and the Duo shows up on your computer as a 1 MB ARCADE ROMS drive — copy the MAME zip files onto it. ROMs are not included.
- High scores are kept when you switch off, and your games and scores survive firmware updates.
Atari Games (NEW)
- The Duo becomes an Atari 400/800/XL/XE — and an Atari 5200. Run your own .xex, .atr, cartridge, 5200 and zip files from the same ROM drive; the Atari operating system is built in, so no Atari ROMs are needed.
- Your controllers, your way. Joysticks and paddles on both ports, the 5-way hat as joystick 1 (press = fire), START / SELECT / OPTION / SPACE on the colored buttons, and an on-screen Atari keyboard on Blue. A tap of Menu picks the picture Scale mode.
Start-up Menu and Games Menu (NEW)
- Choose what the Duo does at power-up: Game Adapter, Arcade Games, Atari Games, or iCode Games. The starred default starts by itself after 8 seconds — set it right from the menu, or with Start-up Default under General. Turn the menu off with Start-up Menu.
- One Games menu at the top of the main menu (or Yellow + Menu) for Arcade Games, Atari Games and iCode Games. The built-in Mini-Games are now iCode Games, with Jaw Cruncher joining Iron Dome and Brick Bash.
- Lights out while you play. The RGB lights switch off during any game and come back when you return to the adapter.
Auto Controller Detection (NEW)
- Stick+Paddles is now Auto. Besides joysticks and paddles, it recognizes keypads, driving controllers and 2600 trackballs (CX-22 / CX-80 in trackball mode) and switches to them by itself.
- How it detects. Paddles and keypads are recognized as soon as they’re plugged in, a driving controller once you turn the wheel, and a trackball once you roll the ball up or down. Swap back to a joystick and just move it.
- Auto settings in the menu. An Auto port’s settings include Driving & Trackball and a Keypad Keys page, so every detected controller can be tuned. Axis is fixed on Auto; pick Driving or Trackball mode to change it.
Atari Gamestation Pro Support (NEW)
- New “Classic 2” USB emulation mode. The Gamestation Pro treats the Duo like its own joystick. Set Function to D-Pad for joystick games, and the paddle axis to Trigger for paddle games.
Improvements
- Atari 5200 Trak-Ball (CX-53) on the 5200 coupler: smoother, drift-free movement, and Resolution and Acceleration now take effect.
- RetroArch: the iCodeHub settings channel no longer appears as an extra controller between pads 1 and 2.
- Windows: the Duo keeps one device entry no matter which ports are active.
- Menu: opens when you release the Menu button, so Menu + color button shortcuts no longer flash the menu first.
Fixes
- Pressing the gray Menu button no longer moves player 1 to the right.
- Paddles turned all the way clockwise are no longer mistaken for a 7800 joystick with both buttons held.
- Restart confirmations: Red and Green pick the highlighted choice, and Cancel stays the default.
- The menu can no longer be left open on a blank screen, and closing it no longer sends a one-frame press of every button.
Upgrade Notes
- Use the full release file (DuoUltimateV230H1.uf2): it includes the arcade and Atari games.
- The start-up menu is on after updating. Pick Game Adapter, wait 8 seconds, or turn it off under General → Start-up Menu.
- Settings and presets are not kept during the update — save them to your iCodeHub Vault first and reload them afterward.
- Windows / RetroArch: the Duo may show up as a new controller once after updating; re-map it if needed.
Duo Ultimate H1 2.20 — May 24, 2026
iCode Duo Ultimate USB – Version 2.2 H1
Sticky rapid fire, custom joystick direction mapping, an emulator-friendly Driving mode, and smarter keypad defaults
Sticky Rapid Fire (NEW)
- Hands-free auto-fire — one of our most-requested features. Hold a rapid-fire button for 2 seconds and it now latches: it keeps firing on its own until you tap the button again to stop. No more holding the button down for a whole level.
- Per-button and easy to set. When choosing a button’s rapid-fire rate, pick the new SF (sticky) option instead of RF. Works for both your controller’s fire buttons and the device’s own buttons.
Joystick Direction Mapping (NEW)
- Remap each joystick direction independently. A new Directions section for the Atari Stick lets you assign Up, Down, Left, and Right to whatever you want — any gamepad button, direction, or action. By default they stay as Up/Down/Left/Right, so nothing changes unless you choose to change it.
- Turn your stick into buttons. Paired with Buttons-Only function, the four directions can be mapped to gamepad buttons — handy for menu navigation, fighting-game layouts, or games that expect buttons instead of a d-pad.
Driving Controller — Raw Output Mode (NEW)
- Better support for emulators that decode the driving controller themselves. Some emulators — such as Stella 7 with its “allow all 4 directions on joystick” option — prefer to read the driving controller’s raw signal and do their own decoding. The new Raw toggle in the Driving section sends those two raw lines as independent gamepad buttons so the emulator can handle the rest.
- Fully additive — nothing else changes. Your normal analog / d-pad driving output and the on-screen animation keep working exactly as before; Raw mode just layers the two extra button signals on top. It’s off by default — turn it on and map the two buttons to your emulator’s driving inputs.
Directional Keypad Defaults
- Keypad keys 2/4/5/6 now act as a direction pad out of the box. On a fresh setup, keys 2/4/5/6 default to Up/Left/Down/Right — giving every keypad controller a built-in directional cluster. You can still remap any key however you like.
Upgrade Notes
- Atari Stick users — please read. The Stick now reads its four directions from a remappable Directions section. On an existing setup these slots may carry old values, so if your stick stops moving after updating, open the new Directions section (in the menu or iCodeHub) and set Up/Down/Left/Right back to their matching directions.
- Vectrex users: Button 4’s storage location changed in this release. After updating, re-check your Vectrex Button 4 mapping and set it again if needed — it may read as unmapped.
- Keypad users: if you reuse a single preset’s keypad across different consoles, double-check your keypad key mappings are still what you intend after updating.
- iCodeHub fully updated to expose all of the new 2.2 options.
Duo Ultimate H1 2.10 — May 20, 2026
iCode Duo Ultimate USB – Version 2.1 H1
Vectrex Controller support, improved USB compatibility, and refinements across the board
Vectrex Controller Support (NEW)
- Plug in your Vectrex controller and play. Full support for the analog X/Y joystick and all four face buttons. No coupler or extra accessory required — just select Vectrex from the Console menu and you’re ready to go.
- Smooth, accurate stick response — the firmware reads the Vectrex stick directly for clean, linear movement across the full range of motion.
- Per-controller calibration — a built-in calibration routine lets you fine-tune the stick to your specific controller in seconds. Captures are saved automatically and persist across power cycles.
- Familiar configuration options — Resolution, Deadzone, Jitter Control, Jitter Averaging, and full per-button action mapping with rapid fire, all available right in the menu.
- Live diagnostic overlay — optional on-screen display of stick position and calibration values for tinkerers and troubleshooting.
USB Compatibility
- Improved compatibility with a wider range of host systems. Earlier versions could occasionally have trouble starting up on certain older systems and specific configurations — particularly some Raspberry Pi and Linux setups. This release reworks the USB connection sequence so the adapter is reliably recognized across a broader range of hosts.
- Better recovery from connection hiccups — minor disturbances like cable bumps or brief host pauses no longer interrupt gameplay; the adapter recovers gracefully and keeps going.
- New on-screen USB indicator — when Diagnostic Heartbeat is enabled, the indicator now shows USB connection state at a glance, making it easy to tell whether the host has recognized the adapter.
Other Improvements & Polish
- Missile Command speed tuned — gameplay pacing tightened slightly for a more responsive feel.
- iCodeHub fully updated to support all 2.1 functionality, including the new Vectrex controller settings and calibration data.
Duo Ultimate H1 2.00 — May 6, 2026
iCode Duo Ultimate USB – Version 2.0 H1
Major update — Atari 5200 Controllers, Auto Center for Trackballs & Driving, and the all-new Jaw Cruncher mini-game
Atari 5200 Controllers Support (NEW)
- Atari 5200 Handheld Controller support — full 5200 stick experience via Single or Dual Coupler accessory. Analog stick, dual fire buttons (Fire A/B), Start/Pause/Reset, and the 12-key keypad — all fully configurable through the menu and iCodeHub.
- Atari 5200 Trackball (CX-53) support — native CX-53 trackball with automatic detection. Reads the analog tachometer signal directly through the 5200 coupler.
- Single vs Dual Coupler auto-detection — Single coupler uses both ports for one controller (full keypad). Dual coupler enables two controllers simultaneously (less the keypad). Firmware detects which coupler is plugged in and switches behavior automatically; no menu juggling required.
- Auto preset switching — when a coupler is plugged in, the firmware automatically switches to the first matching 5200 preset and reboots cleanly. Auto-reverse on unplug avoids stranding the user in 5200 mode after the coupler is removed.
- Visual feedback on LCD — live overlay showing stick deflection, fire/start/pause/reset/keypad button states for both Single and Dual layouts.
Auto Center — Play ANY Game with Your Trackball or Driving Controller (NEW)
- Unlock games your trackball or driving controller never officially supported. Auto Center transforms these classic input devices into responsive stick-style controllers, so you can finally play Asteroids, Space Invaders, Galaga, Defender — or any game you’ve ever wished worked with your trackball — using your real Atari hardware. The cursor automatically returns to neutral when the ball or wheel stops moving, exactly like an analog stick would.
- Six speed levels — Off, Very Slow, Slow, Medium, Fast, Very Fast — let you dial in the perfect feel for each game. Twitchy shooters? Crank it to Very Fast. Slow strategy games? Very Slow lets your cursor coast smoothly back.
- Per-port and per-device — set independently for each port and applies to:
- 2600 Trackball — multiplicative amplification on natural pulse-rate decel (×1.0 to ×4.0). Higher levels pull the cursor back faster while the ball is still rolling.
- 5200 CX-53 Trackball — any non-zero level enables auto-center; speed timing governed by the trackball’s internal RC integrator.
- Atari Driving Controller — linear ax/ay decay after the wheel sits idle, with setting-dependent idle gates so brief pauses don’t trigger unwanted decay.
- Smart DPad Override — when your controller is configured as a DPad, Auto Center automatically engages even if you’ve selected Off. No more dpad locked in one direction after you let go of the ball or wheel.
- Mouse mode is unaffected — Auto Center only shapes the gamepad axis. Cursor / mouse output continues to behave like a true trackball regardless of the setting.
Jaw Cruncher Mini-Game (NEW)
- All-new built-in arcade dot-muncher — chase pellets, dodge monsters, scarf power pellets to flip the chase. Built using the same engine as Iron Dome and Brick Bash, runs entirely on the device with no host or game cart needed.
- Full monster AI — four monsters with classic chase / scatter / frightened modes, monster-home dot counters, level-based scatter/chase phases, frightened mode that slows the monsters and flips them blue. Eat them in sequence for the classic 200/400/800/1600 point cascade.
- Bonus fruit appears at standard dot thresholds with rising point values per level.
- Plays great with most controllers — Atari joystick, trackball, keypad, or your device’s built-in 5-way hat. Pair it with the new Auto Center mode for a fresh take on the classic with your trackball.
- High Score persistence + leaderboard — your top score is saved across power cycles and synced to the iCodeHub community leaderboard alongside Iron Dome and Brick Bash.
- Special surprise Easter Egg — tap away at your buttons during the game and enjoy.
Display & Performance
- New graphics engine — significantly faster screen rendering, smoother animations and display updates.
- Game Engine v2 — improved performance and visuals for built-in mini-games.
Duo Ultimate H1 1.03 — April 2, 2026
iCode Duo Ultimate USB – Version 1.03 H1
- Improved resiliancy, restoring deffaults if an invalid configuration is found for any reason.
Duo Ultimate H1 1.02 — March 24, 2026
iCode Duo Ultimate USB – Version 1.02 H1
- Fixed launching of Mini games when accessing minigame menu from main menu (It was previously showing a black screen). Previously you could only get to mini games by using Yellow+Menu Combo.
- Fixed Registration alert for Iron Dome start screen
Duo Ultimate H1 1.01 — February 25, 2026
Analog & Input Processing
- Jitter-Free Analog Pipeline — Proprietary signal processing eliminates noise and drift from paddle, driving, trackball, and speed roller inputs.
- Auto Detect & Calibrate — Automatically detects paddle controllers and calibrates them on the fly with no manual setup.
- Dynamic Axis Control — Choose horizontal or vertical axis orientation with the ability to switch dynamically during gameplay.
- Adjustable Sensitivity & Acceleration — Slow movements stay precise, fast movements ramp up for quick response.
Controller Support
- Dual DB9 Ports — Connect two controllers with fully independent console type, device, and mapping configurations per port.
- Multi-Platform Compatibility — Supports classic Atari, ColecoVision, Intellivision, and Sega Genesis controllers.
- 4-Player Paddle Support — Reads both paddles per port; exclusive Split Mode presents each as a separate USB gamepad.
USB Output & Emulation
- Five USB Emulation Modes — Standard, Classic, Nintendo, Legacy, and iOS presets.
- Dual Mode Output — Configure as gamepad, mouse, or both simultaneously.
- USB Mouse Emulation — Paddles, trackball, and driving controllers can operate as a USB mouse.
- True Plug and Play — Standard USB HID device, no drivers required.
- SBC & Emulation Compatible — Works with RetroPie, Batocera, EmuELEC, and any Linux-based frontend.
Button Mapping & Macros
- Programmable Device Buttons — 5-direction hat and 6 buttons, each mappable with up to 3 simultaneous functions.
- Multi-Function Fire Buttons — Controller fire buttons support up to 3 mapped functions each.
- Full Keypad Mapping — Assign any Atari, Intellivision, or ColecoVision keypad key to any gamepad function.
- Direction-to-Action Mapping — Remap stick directions to buttons or vice versa.
- Configurable Rapid Fire — Per-button auto-fire with adjustable speed.
Display & Audio
- Built-In Color LCD — Real-time animated controller visualization with three display modes.
- 10-Channel Polyphonic Audio — Built-in speaker with adjustable volume for menus, feedback, and games.
Built-In Mini-Games
- Iron Dome — Missile Command-style game playable on the LCD with built-in or connected controllers.
- Brick Bash — Arkanoid-style game with trackball support for smooth analog control.
Presets & Cloud
- 10 On-Device Presets — Save and switch between complete controller configurations.
- Cloud Backup via iCodeHub — Automatically backed up, manage and expand up to 100 presets.
- Smart Conflict Detection — Side-by-side comparison when on-device and cloud presets differ.
- Community Leaderboards — Mini-game high scores ranked against other iCode owners.
iCodeHub Companion App
- Web-Based Configuration — Cloud vault, firmware updates, and leaderboards via WebHID — no installation required.
- Passwordless Sign-In — Google OAuth or one-time email/phone code.
- Device Registration & Transfer — Seamless ownership transfer when gifted or sold.
Firmware & Updates
- Over-the-Air Updates — Update directly through iCodeHub with version history and recovery mode.
- USB Firmware Updates — Flashing via iCodeHub or BOOTSEL mode.
- Combo Key Shortcuts — Quick access to display toggle, port menus, mini-games, and preset switching.
Hardware
- Dual-Core RP2350 Processor — Fast polling, precise timing, and smooth multitasking.
Duo Ultimate SE H1-CX
Latest firmware: version 2.20 · released November 3, 2026
Update with iCodeHub Download firmware (.uf2) User manual (PDF)
The easiest way to update is iCodeHub in Chrome or Edge — it picks the right firmware for your device and shows these release notes as it updates. If you install the .uf2 file yourself, make sure it is the file for Duo Ultimate SE H1-CX: firmware for another model can stop your device from working.
Release notes
Duo Ultimate SE H1-CX 2.20 — November 3, 2026
iCode Duo Ultimate SE-CX USB – Version 2.2 H1
Auto controller detection, sticky rapid fire, joystick direction mapping, an emulator-friendly Driving mode, and better RetroArch and Windows behavior
Auto Controller Detection (NEW)
- Joystick + Paddles is now Auto. Besides joysticks and paddles, it recognizes keypads, driving controllers and 2600 trackballs (CX-22 / CX-80 in trackball mode) and switches to them by itself — no need to cycle modes with Black + White.
- How it detects. Paddles and keypads are recognized as soon as they’re plugged in, a driving controller once you turn the wheel, and a trackball once you roll the ball up or down. Swap back to a joystick and just move it.
- LED 2 shows what it found — dark red for paddles, blue for driving, purple for trackball, yellow for keypad, green for a joystick. Holding Black + White still selects a fixed mode if you prefer.
Sticky Rapid Fire (NEW)
- Hands-free auto-fire. Hold a rapid-fire button for 2 seconds and it latches: it keeps firing on its own until you tap the button again. Choose the new SF (sticky) option instead of RF for a button’s rapid-fire rate in iCodeHub.
Joystick Direction Mapping (NEW)
- Remap each joystick direction independently. A new Directions section in iCodeHub lets you assign Up, Down, Left, and Right to any gamepad button, direction, or action. By default they stay as Up/Down/Left/Right.
Driving Controller — Raw Output Mode (NEW)
- For emulators that decode the driving controller themselves (such as Stella 7). The new Raw toggle sends the controller’s two raw lines as independent gamepad buttons, on top of the normal driving output. Off by default.
Improvements
- Keypad keys 2/4/5/6 act as a direction pad out of the box (Up/Left/Down/Right) on a fresh setup.
- RetroArch: the iCodeHub settings channel no longer appears as an extra controller between pads 1 and 2.
- Windows: the adapter keeps one device entry no matter which ports are active.
- Atari 5200 Trak-Ball (CX-53) on the 5200 coupler: smoother, drift-free movement, and Resolution and Acceleration now take effect.
Fixes
- Paddles turned all the way clockwise are no longer mistaken for a 7800 joystick with both buttons held.
- A held 2600 fire button no longer disturbs the 7800 two-button check.
Upgrade Notes
- Joystick users — please read. The joystick now reads its four directions from the remappable Directions section. If your stick stops moving after updating, open Directions in iCodeHub and set Up/Down/Left/Right back to their matching directions.
- Settings and presets are not kept during the update — save them to your iCodeHub Vault first and reload them afterward.
- Windows / RetroArch: the adapter may show up as a new controller once after updating; re-map it if needed.
Duo Ultimate SE H1-CX 2.10 — May 20, 2026
iCode Duo Ultimate SE-CX USB – Version 2.1 H1
Improved USB compatibility and refinements across the board
USB Compatibility
- Improved compatibility with a wider range of host systems. Earlier versions could occasionally have trouble starting up on certain older systems and specific configurations — particularly some Raspberry Pi and Linux setups. This release reworks the USB connection sequence so the adapter is reliably recognized across a broader range of hosts.
- Better recovery from connection hiccups — minor disturbances like cable bumps or brief host pauses no longer interrupt gameplay; the adapter recovers gracefully and keeps going.
- New on-screen USB indicator — when Diagnostic Heartbeat is enabled, the indicator now shows USB connection state at a glance, making it easy to tell whether the host has recognized the adapter.
Other Improvements & Polish
- iCodeHub fully updated to support all 2.1 functionality.
Duo Ultimate SE H1-CX 1.03 — April 1, 2026
iCode Duo Ultimate SE – Version 1.03 H1-CX
- Improved resiliancy, restoring deffaults if an invalid configuration is found for any reason.
Duo Ultimate SE H1-CX 1.02 — March 24, 2026
Controller Support
- Atari Controllers — Supports two Atari Joysticks (Single and Dual button), up to 4 Paddles, 2 Driving Controllers, 2 Trackballs, or 2 Keypads
- Dual DB9 Ports — Connect two controllers as fully independent controllers.
- 4-Player Paddle Support — Reads both paddles per port; exclusive Split Mode presents each as a separate USB gamepad.
Analog & Input Processing
- Jitter-Free Analog Pipeline — Proprietary signal processing eliminates noise and drift from paddle, driving, trackball, and speed roller inputs.
- Auto Detect & Calibrate — Automatically detects paddle controllers and calibrates them on the fly with no manual setup.
- Dynamic Axis Control — Choose horizontal or vertical axis orientation with the ability to switch dynamically during gameplay.
- Adjustable Sensitivity & Acceleration — Slow movements stay precise, fast movements ramp up for quick response.
USB Output & Emulation
- Five USB Emulation Modes — Standard, Classic, Nintendo, Legacy, and iOS compatibility modes.
- Dual Mode Output — Configure as gamepad, mouse, or both simultaneously.
- USB Mouse Emulation — Paddles, trackball, and driving controllers can operate as a USB mouse.
- True Plug and Play — Standard USB HID device, no drivers required.
- SBC & Emulation Compatible — Works with RetroPie, Batocera, EmuELEC, and any Linux-based frontend.
Button Mapping & Macros
- Programmable Device Buttons — 2 buttons, each mappable with up to 3 simultaneous functions.
- Multi-Function Fire Buttons — Controller fire buttons support up to 3 mapped functions each.
- Full Keypad Mapping — Assign any Atari keypad key to any gamepad function.
- Direction-to-Action Mapping — Remap stick directions to buttons or vice versa.
iCodeHub Companion App
- Web-Based Configuration — Firmware updates, and leaderboards via WebHID — no installation required.
- Passwordless Sign-In — Google OAuth or one-time email/phone code.
- Device Registration & Transfer — Seamless ownership transfer when gifted or sold.
Firmware & Updates
- Over-the-Air Updates — Update directly through iCodeHub with version history and recovery mode.
- USB Firmware Updates — Flashing via iCodeHub or Manual Firmware Update mode.
Hardware
- Dual-Core RP2350 Processor — Fast polling, precise timing, and smooth multitasking.
Duo Ultimate SE H1-COL
Latest firmware: version 2.20 · released November 3, 2026
Update with iCodeHub Download firmware (.uf2) User manual (PDF)
The easiest way to update is iCodeHub in Chrome or Edge — it picks the right firmware for your device and shows these release notes as it updates. If you install the .uf2 file yourself, make sure it is the file for Duo Ultimate SE H1-COL: firmware for another model can stop your device from working.
Release notes
Duo Ultimate SE H1-COL 2.20 — November 3, 2026
iCode Duo Ultimate SE-COL USB – Version 2.2 H1
ColecoVision controller fix, keypad keys as buttons by default, and sticky rapid fire
Controller Fix
- Your ColecoVision controller now works. In 2.1 the adapter didn’t read the controller — no movement and no controller buttons, while the adapter’s own Black and White buttons still worked. 2.2 reads the controller on both ports.
Keypad Defaults
- Every keypad key is its own button out of the box. Keys 1–9 send gamepad buttons 0–8, * sends 9, 0 sends 10, and # sends 11. Keys 2, 4, 5 and 6 are no longer mapped to directions by default, so number entry works the way the console expects. Remap any key in iCodeHub.
Sticky Rapid Fire (NEW)
- Hands-free auto-fire. Hold a rapid-fire button for 2 seconds and it latches: it keeps firing on its own until you tap the button again. Choose the new SF (sticky) option instead of RF for a button’s rapid-fire rate in iCodeHub.
Improvements
- RetroArch: the iCodeHub settings channel no longer appears as an extra controller between pads 1 and 2.
- Windows: the adapter keeps one device entry no matter which ports are active.
Upgrade Notes
- Settings and presets are not kept during the update — save them to your iCodeHub Vault first and reload them afterward.
- Keypad mappings: presets restored from the Vault keep their saved keypad mappings; if a saved preset still has keys 2/4/5/6 as directions, set them back to their own buttons in iCodeHub.
- Windows / RetroArch: the adapter may show up as a new controller once after updating; re-map it if needed.
Duo Ultimate SE H1-COL 2.10 — May 20, 2026
iCode Duo Ultimate SE-COL USB – Version 2.1 H1
Initial release — full ColecoVision Hand Controller and Super Action Controller support
ColecoVision Controller Support
- ColecoVision Hand Controller — full support for the digital joystick, both fire buttons, and the complete 12-key keypad.
- ColecoVision Super Action Controller — all four fire buttons (Fire A, Fire B, Purple, Blue), the 12-key keypad, the digital joystick, and the analog Speed Roller.
- Speed Roller control — smooth, drift-free spinner-style movement with adjustable sensitivity and acceleration, configurable orientation, and circular or bounded behavior.
- Switch controllers on the fly — hold both device buttons for 2 seconds to switch between Hand Controller and Super Action Controller; the status LED confirms the change instantly.
Configuration & Control
- Full keypad mapping — every one of the 12 keypad keys can be individually mapped to any gamepad button, directional action, or keyboard key — essential for the many ColecoVision titles that rely on the keypad for play selection, weapon choice, and game options.
- Multi-function buttons — each controller fire button and each on-device button can trigger up to 3 simultaneous actions, with optional rapid fire.
- Two programmable device buttons — map them to any gamepad function (start, select, triggers, shoulders, or any action), targeting either port.
- Dual independent DB9 ports — connect two controllers at once for 2-player games, each with its own settings and button assignments.
- USB mouse emulation — the Super Action Controller’s Speed Roller can operate as a USB mouse for desktop use and mouse-driven games.
USB & Compatibility
- Five USB emulation modes — Standard, Classic, Nintendo, Legacy, and iOS for broad compatibility across platforms and emulators. Hold BLACK while plugging in to cycle modes.
- True plug and play — standard USB HID device with no drivers required, compatible with PCs, Macs, MiSTer FPGA, Nintendo Switch, Steam Deck, RetroPie, Batocera, and more.
- Two RGB status LEDs — show your active USB emulation mode and current controller type at a glance, with no on-device screen needed.
- Built-in power switch — toggle the adapter on and off without unplugging USB.
iCodeHub Companion App
- Free web-based configuration via WebHID in Chrome or Edge — no software to install. Configure controllers, map keys and buttons, and manage settings right from your browser.
- Over-the-air firmware updates with full version history, release notes, and built-in recovery mode.
- Device registration & transfer — your adapter is linked to your account with seamless ownership transfer when gifted or sold.
Duo Ultimate SE H1-INT
Latest firmware: version 2.20 · released November 3, 2026
Update with iCodeHub Download firmware (.uf2) User manual (PDF)
The easiest way to update is iCodeHub in Chrome or Edge — it picks the right firmware for your device and shows these release notes as it updates. If you install the .uf2 file yourself, make sure it is the file for Duo Ultimate SE H1-INT: firmware for another model can stop your device from working.
Release notes
Duo Ultimate SE H1-INT 2.20 — November 3, 2026
iCode Duo Ultimate SE-INT USB – Version 2.2 H1
Intellivision controller fix, keypad keys as buttons by default, and sticky rapid fire
Controller Fix
- Your Intellivision Hand Controller now works. In 2.1 the adapter didn’t read the controller — no movement and no controller buttons, while the adapter’s own Black and White buttons still worked. 2.2 reads the controller on both ports.
Keypad Defaults
- Every keypad key is its own button out of the box. Keys 1–9 send gamepad buttons 0–8, Clear sends 9, 0 sends 10, and Enter sends 11. Keys 2, 4, 5 and 6 are no longer mapped to directions by default, so number entry works the way the console expects. Remap any key in iCodeHub.
Sticky Rapid Fire (NEW)
- Hands-free auto-fire. Hold a rapid-fire button for 2 seconds and it latches: it keeps firing on its own until you tap the button again. Choose the new SF (sticky) option instead of RF for a button’s rapid-fire rate in iCodeHub.
Improvements
- RetroArch: the iCodeHub settings channel no longer appears as an extra controller between pads 1 and 2.
- Windows: the adapter keeps one device entry no matter which ports are active.
Upgrade Notes
- Settings and presets are not kept during the update — save them to your iCodeHub Vault first and reload them afterward.
- Keypad mappings: presets restored from the Vault keep their saved keypad mappings; if a saved preset still has keys 2/4/5/6 as directions, set them back to their own buttons in iCodeHub.
- Windows / RetroArch: the adapter may show up as a new controller once after updating; re-map it if needed.
Duo Ultimate SE H1-INT 2.10 — May 20, 2026
iCode Duo Ultimate SE-INT USB – Version 2.1 H1
Initial release — full Mattel Intellivision Hand Controller support
Intellivision Controller Support
- Mattel Intellivision Hand Controller — full support for the 16-position directional disc, all three side fire buttons, and the complete 12-key keypad.
- 16-position directional disc — precise output across all 16 discrete positions around a full 360-degree circle, with the option to function as an 8-way D-Pad to match your game or emulator.
- Three configurable fire buttons — Fire 1 and Fire 2 support multi-action mapping with rapid fire; Fire 3 provides single-action mapping.
Configuration & Control
- Full keypad mapping — every one of the 12 keypad keys (1-9, Clear, 0, Enter) can be individually mapped to any gamepad button, directional action, or keyboard key — essential for the many Intellivision titles that rely on the keypad for weapon selection, game options, and number entry.
- Multi-function buttons — each controller fire button and each on-device button can trigger up to 3 simultaneous actions, with optional rapid fire.
- Two programmable device buttons — map them to any gamepad function (start, select, triggers, shoulders, or any action), targeting either port.
- Dual independent DB9 ports — connect two controllers at once for 2-player games, each with its own settings and button assignments.
USB & Compatibility
- Five USB emulation modes — Standard, Classic, Nintendo, Legacy, and iOS for broad compatibility across platforms and emulators. Hold BLACK while plugging in to cycle modes.
- True plug and play — standard USB HID device with no drivers required, compatible with PCs, Macs, MiSTer FPGA, Nintendo Switch, Steam Deck, RetroPie, Batocera, and more.
- Two RGB status LEDs — show your active USB emulation mode and connection status at a glance, with no on-device screen needed.
- Built-in power switch — toggle the adapter on and off without unplugging USB.
iCodeHub Companion App
- Free web-based configuration via WebHID in Chrome or Edge — no software to install. Map the disc, keypad, and buttons, and manage settings right from your browser.
- Over-the-air firmware updates with full version history, release notes, and built-in recovery mode.
- Device registration & transfer — your adapter is linked to your account with seamless ownership transfer when gifted or sold.
Duo Ultimate SE H1-VX
Latest firmware: version 2.10 · released May 20, 2026
Update with iCodeHub Download firmware (.uf2) User manual (PDF)
The easiest way to update is iCodeHub in Chrome or Edge — it picks the right firmware for your device and shows these release notes as it updates. If you install the .uf2 file yourself, make sure it is the file for Duo Ultimate SE H1-VX: firmware for another model can stop your device from working.
Release notes
Duo Ultimate SE H1-VX 2.10 — May 20, 2026
iCode Duo Ultimate SE-VX USB – Version 2.1 H1
Initial release — full Vectrex controller support
Vectrex Controller Support
- Plug in your Vectrex controller and play. Full support for the analog X/Y joystick and all four face buttons — no coupler or extra accessory required.
- Smooth analog stick — the Vectrex stick is read directly for smooth, accurate, drift-free movement across the full range of motion, factory-calibrated for crisp response.
- Four mappable face buttons — each fully configurable to any gamepad function, with up to 3 simultaneous actions and optional rapid fire.
- Adjustable stick response — fine-tune resolution and deadzone through iCodeHub to dial in the perfect feel for any game.
Configuration & Control
- Multi-function buttons — each Vectrex face button and each on-device button can trigger up to 3 simultaneous actions, with optional rapid fire.
- Two programmable device buttons — map them to any gamepad function (start, select, triggers, shoulders, or any action), targeting either port.
- Dual independent DB9 ports — connect two controllers at once for 2-player games, each with its own stick response and button assignments.
USB & Compatibility
- Five USB emulation modes — Standard, Classic, Nintendo, Legacy, and iOS for broad compatibility across platforms and emulators. Hold BLACK while plugging in to cycle modes.
- True plug and play — standard USB HID device with no drivers required, compatible with PCs, Macs, MiSTer FPGA, Nintendo Switch, Steam Deck, RetroPie, Batocera, and more.
- Two RGB status LEDs — show your active USB emulation mode and connection status at a glance, with no on-device screen needed.
- Built-in power switch — toggle the adapter on and off without unplugging USB.
iCodeHub Companion App
- Free web-based configuration via WebHID in Chrome or Edge — no software to install. Map buttons, tune stick response, and manage settings right from your browser.
- Over-the-air firmware updates with full version history, release notes, and built-in recovery mode.
- Device registration & transfer — your adapter is linked to your account with seamless ownership transfer when gifted or sold.
