Uno Ultimate Firmware Updates & Release Notes

Firmware, user manual and release notes for the iCode Uno Ultimate.

Update with iCodeHub in Chrome or Edge — it finds the right firmware for your device and installs it. Need help? See iCode Device Help.

iCode Uno Ultimate H1-CXUno Ultimate H1-CX

Latest firmware: version 2.20 · released May 24, 2026

Update with iCodeHub Download firmware (.uf2) User manual (PDF)

The easiest way to update is iCodeHub in Chrome or Edge — it picks the right firmware for your device and shows these release notes as it updates. If you install the .uf2 file yourself, make sure it is the file for Uno Ultimate H1-CX: firmware for another model can stop your device from working.

Release notes

Uno Ultimate H1-CX 2.20 — May 24, 2026

iCode Uno Ultimate USB – Version 2.2 H1-CX

Sticky rapid fire, custom joystick direction mapping, an emulator-friendly Driving mode, smarter keypad defaults, and broader USB compatibility

Sticky Rapid Fire (NEW)

  • Hands-free auto-fire — one of our most-requested features. Hold a rapid-fire button for 2 seconds and it now latches: it keeps firing on its own until you tap the button again to stop. No more holding the button down for a whole level.
  • Per-button and easy to set. When choosing a button’s rapid-fire rate, pick the new SF (sticky) option instead of RF. Works for both your controller’s fire buttons and the device’s own buttons.

Joystick Direction Mapping (NEW)

  • Remap each joystick direction independently. A new Directions section for the Atari Stick lets you assign Up, Down, Left, and Right to whatever you want — any gamepad button, direction, or action. By default they stay as Up/Down/Left/Right, so nothing changes unless you choose to change it.
  • Turn your stick into buttons. Paired with Buttons-Only function, the four directions can be mapped to gamepad buttons — handy for menu navigation, fighting-game layouts, or games that expect buttons instead of a d-pad.

Driving Controller — Raw Output Mode (NEW)

  • Better support for emulators that decode the driving controller themselves. Some emulators — such as Stella 7 with its “allow all 4 directions on joystick” option — prefer to read the driving controller’s raw signal and do their own decoding. The new Raw toggle in the Driving section sends those two raw lines as independent gamepad buttons so the emulator can handle the rest.
  • Fully additive — nothing else changes. Your normal analog / d-pad driving output and the on-screen animation keep working exactly as before; Raw mode just layers the two extra button signals on top. It’s off by default — turn it on and map the two buttons to your emulator’s driving inputs.

Directional Keypad Defaults

  • Keypad keys 2/4/5/6 now act as a direction pad out of the box. On a fresh setup, keys 2/4/5/6 default to Up/Left/Down/Right — giving the keypad controller a built-in directional cluster. You can still remap any key however you like.

USB Compatibility

  • Improved compatibility with a wider range of host systems. Earlier versions could occasionally have trouble starting up on certain older systems and specific configurations — particularly some Raspberry Pi and Linux setups. This release reworks the USB connection sequence so the adapter is reliably recognized across a broader range of hosts.
  • Better recovery from connection hiccups — minor disturbances like cable bumps or brief host pauses no longer interrupt gameplay; the adapter recovers gracefully and keeps going.
  • New on-screen USB indicator — when Diagnostic Heartbeat is enabled, the indicator now shows USB connection state at a glance, making it easy to tell whether the host has recognized the adapter.

Other Improvements & Polish

  • Iron Dome mini-game rebalanced — the built-in missile-defense game is now more approachable, with a gentler difficulty curve and more forgiving explosions (larger blast radius, smoother expansion) for a more fun, playable experience.

Upgrade Notes

  • Atari Stick users — please read. The Stick now reads its four directions from a remappable Directions section. On an existing setup these slots may carry old values, so if your stick stops moving after updating, open the new Directions section (in the menu or iCodeHub) and set Up/Down/Left/Right back to their matching directions.
  • Keypad users: keys 2/4/5/6 now default to Up/Left/Down/Right. Double-check your keypad key mappings are still what you intend after updating.
  • iCodeHub fully updated to expose all of the new 2.2 options.

Firmware 2.20 (.uf2)

Uno Ultimate H1-CX 2.10 — May 20, 2026

iCode Uno Ultimate USB – Version 2.10 H1-CX

Improved USB compatibility and refinements across the board

USB Compatibility

  • Improved compatibility with a wider range of host systems. Earlier versions could occasionally have trouble starting up on certain older systems and specific configurations — particularly some Raspberry Pi and Linux setups. This release reworks the USB connection sequence so the adapter is reliably recognized across a broader range of hosts.
  • Better recovery from connection hiccups — minor disturbances like cable bumps or brief host pauses no longer interrupt gameplay; the adapter recovers gracefully and keeps going.
  • New on-screen USB indicator — when Diagnostic Heartbeat is enabled, the indicator now shows USB connection state at a glance, making it easy to tell whether the host has recognized the adapter.

Other Improvements & Polish

  • iCodeHub fully updated to support all 2.1 functionality.

Firmware 2.10 (.uf2)

Uno Ultimate H1-CX 2.00 — May 6, 2026

iCode Uno Ultimate USB – Version 2.00 H1-CX

Major update — Auto Center for Trackball & Driving Controller, plus the all-new Jaw Cruncher mini-game

Auto Center — Play ANY Game with Your Trackball or Driving Controller (NEW)

  • Unlock games your trackball or driving controller never officially supported. Auto Center transforms these classic input devices into responsive stick-style controllers, so you can finally play Asteroids, Space Invaders, Galaga, Defender — or any game you’ve ever wished worked with your trackball — using your real Atari hardware. The cursor automatically returns to neutral when the ball or wheel stops moving, exactly like an analog stick would.
  • Six speed levels — Off, Very Slow, Slow, Medium, Fast, Very Fast — let you dial in the perfect feel for each game. Twitchy shooters? Crank it to Very Fast. Slow strategy games? Very Slow lets your cursor coast smoothly back.
  • Per-port and per-device — set independently for each port and applies to:
    • Atari Trackball — multiplicative amplification on natural pulse-rate decel (×1.0 to ×4.0). Higher levels pull the cursor back faster while the ball is still rolling.
    • Atari Driving Controller — linear ax/ay decay after the wheel sits idle, with setting-dependent idle gates so brief pauses don’t trigger unwanted decay.
  • Smart DPad Override — when your controller is configured as a DPad, Auto Center automatically engages even if you’ve selected Off. No more dpad locked in one direction after you let go of the ball or wheel.
  • Mouse mode is unaffected — Auto Center only shapes the gamepad axis. Cursor / mouse output continues to behave like a true trackball regardless of the setting.

Jaw Cruncher Mini-Game (NEW)

  • All-new built-in arcade dot-muncher — chase pellets, dodge monsters, scarf power pellets to flip the chase. Built using the same engine as Iron Dome and Brick Bash, runs entirely on the device with no host or game cart needed.
  • Full monster AI — four monsters with classic chase / scatter / frightened modes, monster-home dot counters, level-based scatter/chase phases, frightened mode that slows the monsters and flips them blue. Eat them in sequence for the classic 200/400/800/1600 point cascade.
  • Bonus fruit appears at standard dot thresholds with rising point values per level.
  • Plays great with most controllers — Atari joystick, trackball, keypad, or your device’s built-in 5-way hat. Pair it with the new Auto Center mode for a fresh take on the classic with your trackball.
  • High Score persistence + leaderboard — your top score is saved across power cycles and synced to the iCodeHub community leaderboard alongside Iron Dome and Brick Bash.
  • Special surprise Easter Egg — tap away at your buttons during the game and enjoy.

Display & Performance

  • New graphics engine — significantly faster screen rendering, smoother animations and display updates.
  • Game Engine v2 — improved performance and visuals for built-in mini-games.

Firmware 2.00 (.uf2)

Uno Ultimate H1-CX 1.03 — April 1, 2026

iCode Uno Ultimate USB – Version 1.03 H1-CX

Initial Release

Analog & Input Processing

  • Jitter-Free Analog Pipeline — Proprietary signal processing eliminates noise and drift from paddle, driving, and trackball inputs for rock-solid analog output that other adapters can’t match.
  • Auto Detect & Calibrate — In Auto Stick/Paddles mode, the adapter automatically detects paddle controllers and calibrates them on the fly with no manual setup.
  • Dynamic Axis Control — Choose horizontal or vertical axis orientation for trackball and driving controller, with the ability to switch dynamically during gameplay.
  • Adjustable Sensitivity & Acceleration — Sensitivity controls how much physical movement is needed to travel from one position to another, while advanced acceleration dynamically responds to speed — slow movements stay precise and controlled, fast movements ramp up for quick response, giving you the best of both worlds without sacrificing accuracy.

Controller Support

  • Any Atari Controller — Connect your original controllers including the legendary Atari Joystick, the 7800 Dual Button Stick, Atari Paddles, Atari Driving Controller, Atari Trackball, and Atari Keypad.
  • Dual Paddle Support — Reads both paddles on the port

USB Output & Emulation

  • Five USB Emulation Modes — Standard, Classic, Nintendo, Legacy, and iOS presets for broad compatibility across platforms and emulators.
  • Dual Mode Output — Trackball and other analog controllers can be configured as gamepad, mouse, or both simultaneously — no preset switching needed.
  • USB Mouse Emulation — Paddles, trackball, and driving controllers can operate as analog gamepad or a standard mouse with adjustable sensitivity and acceleration for desktop use or mouse-driven games.
  • True Plug and Play — Standard USB HID device, no drivers required on any platform.
  • SBC & Emulation Compatible — Works seamlessly with RetroPie, Batocera, EmuELEC, and any Linux-based emulation frontend with RetroArch or standalone emulator backends.

Button Mapping & Macros

  • Programmable Device Buttons — 5-direction hat and 6 buttons on the adapter itself, each mappable to any gamepad function (start, select, triggers, shoulders, or any action) with up to 3 simultaneous functions per button.
  • Multi-Function Fire Buttons — Connected controller fire buttons also support up to 3 mapped functions each for powerful macro-like control without software.
  • Full Keypad Mapping — Assign any Atari keypad key to any USB gamepad function or directional action.
  • Direction-to-Action Mapping — Remap stick directions to buttons or vice versa for creative control schemes.
  • Configurable Rapid Fire — Per-button auto-fire with adjustable speed.

Display & Audio

  • Built-In Color LCD — Real-time animated controller visualization with three display modes: animated overlay, advanced HUD, and display off.
  • 10-Channel Polyphonic Audio — Built-in speaker with adjustable volume delivers rich sound for menu navigation, status feedback, and built-in games.

Built-In Mini-Games

  • Iron Dome — Missile Command-style game playable on the LCD with built-in controls or your connected controllers.
  • Brick Bash — Arkanoid-style game with trackball support for smooth analog control.

Presets & Cloud

  • 10 On-Device Presets with Cloud Backup — Save and switch between complete controller configurations on the device, automatically backed up via iCodeHub where you can manage, name, and expand to up to 100 cloud presets.
  • Smart Conflict Detection — When on-device and cloud presets differ, choose which version to keep with a clear side-by-side comparison.
  • Community Leaderboards — Built-in game high scores are automatically submitted and ranked against other iCode owners.

iCodeHub Companion App

  • Web-Based Configuration — Free web-based configuration, cloud vault, firmware updates, and leaderboards via WebHID in Chrome or Edge — no software installation required.
  • Passwordless Sign-In — Google OAuth or one-time email/phone code, no password to manage.
  • Device Registration & Transfer — Your adapter is linked to your account with seamless ownership transfer when gifted or sold.

Firmware & Updates

  • Over-the-Air Firmware Updates — Update firmware directly through iCodeHub with full version history, release notes, and built-in recovery mode.
  • USB Firmware Updates — Simple firmware flashing via iCodeHub or update mode for future feature updates.
  • Combo Key Shortcuts — Quick access to display toggle, mini-games, preset switching, and firmware update via button combinations.

Hardware

  • Dual-Core RP2040 Processor — Powerful microcontroller delivers fast polling, precise timing, and smooth multitasking across input scanning, USB output, display rendering, and audio.

Firmware 1.03 (.uf2)