I have an iCode Duo Ultimate H1 Universal USB Adapter. As soon as I got it, I followed the setup instructions (though I can’t quite remember whether they were in a video or the documentation) and managed to configure two paddles perfectly on an Atari 7800 for Warlords. At some point, I made some changes – probably the wrong ones – and had to redo the setup.
Here’s the link to the document:
https://www.icode.com/how-to-set-up-4-player-paddles-on-mister-fpga-with-the-icode-duo-ultimate/
I’m about to go through the configuration process again as instructed. Everything’s going well; I skip ‘fire1’ and click on ‘fire2’ as the second button. When I get to ‘Paddle button’, I click the fire button on the first paddle, but it doesn’t respond to commands. I’ve tried switching off, switching back on, saving… you name it. Can anyone explain why the paddle button isn’t being assigned, even though I’ve left it unassigned as per the instructions?
Kind regards.
I’ve made a bit more progress. On MiSTer, I enabled the input tester and discovered that both ‘Paddle 1 Button’ and ‘Paddle 2 Button’ correspond to the B button. This explains why, when on the Atari 7800 button configuration you set ‘Paddle 2 Button’ as fire button 2, the Paddle 2 Button itself doesn’t actually respond. I used the configuration described in the link in the first post. How can I separate the inputs for the two paddle buttons?
Thanks to everyone, and have a good day.
Marco
Did you end up getting this solved? I am having the exact same problem. I’m stuck at the “paddle button” not being able to be assigned.
you make have missed the last part of step 2.
Load the Atari 7800 core, open the OSD (F12), and go to the Peripherals menu:
- Port1 Input → Paddle
- Port2 Input → Paddle
- Allow Multi Paddles → Yes (this lets each gamepad supply two paddles — one on X, one on Y)
Did you change allow Multi Paddles to Yes?
i tried it and it works for me.
Hello to everybody.
I solved the problem.
It was the configuration on the iCode Duo. Both paddle buttons were configured as “Button 0” (Paddle A Button & Paddle B Button).
I changed, assigning to Paddle B Button, Button 1.
I saved the configuration and it worked immediately.
I have still to understand why the second time I got a modified configuration with the same Button 0.
@ali jani: yes, I had made the right configuration on Atari 7800.
I discovered the mistake, trying the check utility for pad on MiSTer.
I hope it works for you @matanik1
The paddles work also with hte Original Pong.
Enjoy your weekend!
