iCode Support Forums

Notifications
Clear all

Which iCode Spinner or Trackball do I have? H1, H2, H3 ?

1 Posts
1 Users
0 Reactions
114 Views
(@ali)
Member Admin
Joined: 3 years ago
Posts: 68
Topic starter   [#85]

Some of you have been asking how to tell which hardware version you have, so here’s a quick guide. It matters because each version needs its own firmware.

The easy way: ask the device. Tap Black to open the Settings Menu and choose System Info. It shows your model and firmware version. You may also see the model and version briefly on the screen when it starts up.

If you can’t get to either, here’s how to tell by looking at your device.

Spinner

  • Monochrome screen, no power LED → H1
  • Monochrome screen with a power LED → H2
  • Color screen → H3

Trackball

  • Monochrome screen → H1
  • Color screen → H2 or H3. These two look identical from the outside.

If you have a color Trackball and can’t get to System Info, install the H3 firmware and try every button:

  • If everything works, you have an H3.
  • If the big left (blue) arcade button doesn’t respond, or the arcade button lights don’t follow your presses, while everything else works, you have an H2. Install the H2 firmware and you’re all set.

Don’t worry about trying the wrong one: it won’t harm anything, and installing the right firmware fixes it.

And if you got one of the new Bluetooth Wireless model that can run on battery, it’s an H3-W. Use the H3-W firmware.

Any questions, just ask below!



   
Quote
Share: