Name: Terasic DE10 NANO FPGA Board for MiSTer Project
SKU: DE10NANO
Price: 269.95 USD
Availability: InStock

Terasic DE10 NANO FPGA Board for MiSTer Project

$269.95

In stock

The DE10-Nano Development Kit presents a robust hardware design platform built around the Intel System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. Users can now leverage the power of tremendous re-configurability paired with a high-performance, low-power processor system. Altera’s SoC integrates an ARM-based hard processor system (HPS) consisting of processor, peripherals and memory interfaces tied seamlessly with the FPGA fabric using a high-bandwidth interconnect backbone. The DE10-Nano development board is equipped with high-speed DDR3 memory, analog to digital capabilities, Ethernet networking, and much more that promise many exciting applications.

The DE10-Nano Development Kit contains all the tools needed to use the board in conjunction with a computer that runs the Microsoft Windows XP or later.

Buy it now

DE10-Nano Kit
The DE10-Nano board has many features that allow users to implement a wide range of designed circuits, from simple circuits to various multimedia projects. The following hardware is provided on the board:

FPGA Device
Intel Cyclone® V SE 5CSEBA6U23I7 device (110K LEs)
Serial configuration device – EPCS64 (revision B2 or later)
USB-Blaster II onboard for programming; JTAG Mode
HDMI TX, compatible with DVI 1.0 and HDCP v1.4
2 push-buttons
4 slide switches
8 green user LEDs
Three 50MHz clock sources from the clock generator
Two 40-pin expansion headers
One Arduino expansion header (Uno R3 compatibility), can be connected with Arduino shields
One 10-pin Analog input expansion header (shared with Arduino Analog input)
A/D converter, 4-pin SPI interface with FPGA
* If the specification of memory device in Quick Start Guide and official website is discordant, refer to DE10-Nano website as the sole stardard.

HPS (Hard Processor System)
800MHz Dual-core ARM Cortex-A9 processor
1GB DDR3 SDRAM (32-bit data bus)
1 Gigabit Ethernet PHY with RJ45 connector
USB OTG Port, USB Micro-AB connector
Micro SD card socket
Accelerometer (I2C interface + interrupt)
UART to USB, USB Mini-B connector
Warm reset button and cold reset button
One user button and one user LED
LTC 2×7 expansion header

Show More Show Less