Essential Insurance for your DE10-Nano & USB Hub
While the MiSTer USB bridge is a fantastic way to clean up your build, it introduces a significant risk: mechanical leverage. Because the USB ports on the DE10-Nano and the USB Hub are surface-mounted, they are not designed to handle the vertical pressure of a bridge being pushed in too far.
Our custom-fit enclosures solve this problem by providing a physical “hard stop,” protecting your hardware from one of the most common (and expensive) MiSTer hardware failures.
Why You Need an Enclosure
- Stop “Over-Insertion” Damage: Without a case, there is nothing to stop the bridge from being pushed too deep. This creates extreme leverage on the internal solder joints, which can snap the USB ports clean off the boards.
- Save on Costly Repairs: A snapped port on a DE10-Nano often requires a professional repair or a total board replacement. This $5 enclosure protects a $200+ investment.
- Perfect Alignment: The enclosure ensures the bridge is perfectly leveled between the two boards, eliminating “sag” or tilted connections that can cause intermittent data loss.
- Complete Shielding: Beyond structural support, the case protects the exposed solder points and pins on the bridge from dust, debris, and accidental shorts.
Product Features
- Precision Fit: Designed specifically for the official USB bridge dimensions.
- Two-Piece Design: Features a top and bottom shell that snap securely around the bridge PCB.
- Durable Material: 3D printed in high-quality, heat-resistant filament that stands up to the warmth generated by the DE10-Nano.
- Custom Aesthetics: Available in a variety of colors to match your MiSTer case or internal theme (choose your color – leave a note duing checkout).
Compatibility Note
This enclosure is compatible with both the Offset (End-Aligned) and Standard (Center-Aligned) MiSTer USB bridges.
⚠️ Installation Tip: When installing, place the bridge inside the enclosure first, then gently press the entire assembly into your MiSTer stack. The case will hit the Mister Case housings at the perfect depth, preventing any strain on the Hub and De10 boards.
