Notifications
Clear all
Topic starter
29/10/2026 1:15 pm
A question regarding my spinner:
I have configured my MAME setup to work with a custom-built spinner. It has a resolution of 600 PPR (2400 pulses per revolution), and the software halves this to 1200 pulses per rotation. Consequently, I have adjusted the settings for all my games in MAME accordingly (e.g., Tempest: sensitivity 6, Arkanoid: 41, etc.) and this works fine like the original cabinets. Which sensitivity setting in the HUB corresponds to these values? Is it possible to enter specific numerical values instead of selecting options like "High" or "Very High"?
Thanks in advance...
29/10/2026 3:05 pm
Generally you want to leave the sensitivity on Very High in most cases as it moves the mouse 1 delta unit for every encoder tick so its a 1:1 ratio. on High 2 ticks of encoder moves 1 mouse unit.
| Setting | Encoder ticks per 1 mouse count | Mouse counts per tick |
|---|---|---|
| Very High | 1 | 1 |
| High | 2 | 1/2 |
| Medium | 4 | 1/4 |
| Low | 8 | 1/8 |
| Very Low | 16 | 1/16 |
Table below shows how much does the mouse move per rotation assuming you have acceleration off:
| Setting | Mouse counts per revolution |
|---|---|
| Very High | 2400 |
| High | 1200 |
| Medium | 600 |
| Low | 300 |
| Very Low | 150 |
Robert Polzer reacted