Search Results

16GB eMMC Module for Odroid N2, N2+, C0, C1+, C2, C4, M1, XU4, H2

eMMC storage performance is much higher than SD card performance

Sequential read and write speed is over 150MB/s and 125MB/s respectively.
If you want to only purchase the memory module and don’t have an writer adapter, you contact me and I can load OS of your choice on the module for you at no charge.

 

Odroid USB 3.0 eMMC Module Writer Adapter with HS200 Mode

Easier and faster way to flash your OS image into the eMMC Module. With this unit, you will not need a separate USB card reader. Just attach your eMMC module directly to your PC/Mac via this writer board.

– USB 3.0 Interface
– Native eMMC 8bit wide data interface, instead of slow SD 4bit width
– Works in HS200 mode
– Windows / Mac / Linux Compatible
– Works with ODROID Orange, Red and Blue eMMC modules
– Use with Etcher or Win32DiskImager software on your PC
– It can’t access the eMMC hidden boot blocks
– Rated Power : 5V/500mA (including eMMC module)
– Dimensions : 60x26x4.5 mm

It does not work with the Black eMMC Modules.

Odroid eMMC Reader Writer to Micro SD Adapter

eMMC Module Reader Writer Board Micro SD Adapter

Upgrade your OS in the eMMC.  How to use this small board:

  • Connect the eMMC Module on the connector of this eMMC Module Adapter Board.
  • Slot the board to your own Micro SD to USB Adapter
  • Please choose a high quality USB Multi-reader. The data transfer speed of the eMMC is a lot faster than SD Cards.
  • Plug the USB Multi-reader to your computer.

Note:

  • This is not compatible with with the Micron eMMC mounted 128GB eMMC Modules.
  • You only get the EMMC Micro SD adapter included.  USB Adapter and EMMC module shown in additional pictures are not included.

SATA Mount and cable kit for Odroid M1

A single native (non-USB) SATA 3.0 port on the ODROID-M1 is provided for use with a 2.5inch HDD or SSD NAND Memory storage device. This SATA interface delivers near 500MB/s of sequential access. The SATA mount kit contains a SATA Data cable, a SATA Power cable, and a mount plate with some support screws. However, since the SATA power port doesn’t have a 12Volt power rail, a separated external 12Volt SATA power supply is required to use a 3.5inch HDD.

Odroid M1 Case

A sleek and cool blue metal case  to protect your ODROID-M1 board.

The metal cover is made with aluminum extrusion that has an abrasive blasted surface texture and anodized blue finish. It can be securely docked to the ODRID-M1 heatsink frame via sliding slot. The front and rear side covers were made with gold plated PCBs.

Odroid M1 with 4GB or 8GB DDR4 RAM

 

The ODROID-M1 is a single board computer with a wide range of useful peripherals developed for use in a variety of embedded system applications.

The CPU has four ARM Cortex-A55 processors with low power consumption and high efficiency operation at 2Ghz. The CPU and GPU performance is quite similar to our ODROID-C4.

4GB or 8GB of LPDDR4 DRAM Memory sizes available.

LINKS

Odroid XU4 with 2GB LPDDR3 RAM

ODROID-XU4 is a new generation of computing device with more powerful, more energy-efficient hardware and a smaller form factor. Offering open source support, the board can run various flavors of Linux, including the latest Ubuntu 20.04 and Android 4.4 KitKat, 5.0 Lollipop and 7.1 Nougat.

By implementing the eMMC 5.0, USB 3.0 and Gigabit Ethernet interfaces, the ODROID-XU4 boasts amazing data transfer speeds, a feature that is increasingly required to support advanced processing power on ARM devices.

This allows users to experience an upgrade in computing, especially with faster booting, web browsing, networking, and 3D games

KEY FEATURES

  • * Samsung Exynos5422 Cortex™-A15 2Ghz and Cortex™-A7 Octa core CPUs
    * Mali-T628 MP6(OpenGL ES 3.1/2.0/1.1 and OpenCL 1.2 Full profile)
    * 2Gbyte LPDDR3 RAM PoP stacked
    * eMMC5.0 HS400 Flash Storage Interface (eMMC module sold separately)
    * 2 x USB 3.0 Host, 1 x USB 2.0 Host
    * Gigabit Ethernet port
    * HDMI 1.4a for display
    * Size : 83 x 58 x 20 mm approx.(excluding cooler)
    * Power: 5V/4A input

LINKS

Scroll to top
Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.